Oxy acetylene welding

Stationary oxyacetylene welding equipment is installed where welding operations are conducted in a fixed location. Oxygen and acetylene are provided in the welding area as outlined below.

a. Oxygen. Oxygen is obtained from a number of cylinders manifolded and equipped with a master regulator. The regulator and manifold control the pressure and the flow together (fig. 5-1). The oxygen is supplied to the welding stations through a pipe line equipped with station outlets (fig. 5-2).

b. Acetylene. Acetylene is obtained either from acetylene cylinders set up as shown in figure 5-3, or an acetylene generator (fig. 5-4). The acetylene is supplied to the welding stations through a pipe line equipped with station outlets as shown in figure 5-2.

Welding Terms:

• oxy acetylene welding
• oxy-acetylene welding
• electron beam welding
• welding equipment
• Acetylene Generator

Related welding articles:

1. Portable Oxyacetylene Welding Equipment | oxy acetylene welding equipment
2. Shutting down Oxyacetylene Welding Equipment
3. Acetylene Cylinders : Welding equipment
4. Setting up Oxyacetylene Welding Equipment
5. Oxyacetylene Welding Torch and Cutting Equipment